27
INSTRUCTIONS FOR THE INSTALLER
CHANGING THE FLEXIBLE GAS HOSE
In order to guarantee that the gas hose is always in
excellent condition we strongly recommend changing
it on the date you will nd printed on it.
REPLACING THE ELECTRICAL
COMPONENTS
• The rear protection will have to be removed in order
to change the electrical heating element, lamp holder,
terminal board and power cable.
• If you have to change the power cable (see on
TECHNICAL FEATURES paragraph), always
keep the earth wire longer than the phase wires
and, in addition, follow all the instructions given
in the “ELECTRICAL CONNECTION” paragraph.
• To change the oven lamp see the instructions on
REPLACING THE OVEN LAMP paragraph..
• To change lamp holder (P) (g. 28), use a
screwdriver to push the clamp tips (M) and pull the
lamp holder out towards the inside of the oven.
• To change the electronic clock, the switch and the
warning light, the hob top has to be removed.
28
To Next Page
Loading...
Need help?
General
