10
2.4.11
Changing the intensity of the LED display backlight
Two screen brightness settings are available.
> To change the brightness, press and hold the
NAP/DIMMER/
SLEEP/SNOOZE button (5).
> Pressing the NAP/DIMMER/SLEEP/SNOOZE button again for a longer time (5)
will return to the previous LED intensity.
2.4.12
Time
projection
> To activate the time projection, please press the
PROJECTION ON/ OFF
button
(4)
. The time will be projected and will be visible on the ceiling.
> To adjust the focus of the displayed time, please adjust accordingly
Focus knob (10).
> Pressing the PROJECTION ON/OFF button (4) again will switch off the
screen projection.
2.4.13
FLIP
function
> To reverse the time displayed on the ceiling by 180o during projection,
please press the 180 FLIP button (6)
.
3
Specification
Frequency range: FM 87.5-108 MHz
Power source: AC 230V ~ 50 Hz, 5W
LED display: 1,2"
Device dimensions: 155x63x79mm
Batteries: 2x AAA for memory backup*
Output power: 0.5W
Favourite stations list: 10 positions
Time projection function: YES FLIP
function: Yes
Projector light source: LED
NOTE:
Battery power is only used to maintain the unit's memory in the event of a
power failure (e.g. time memory). Batteries not included.
4
Manufacturer
TechniSat Digital Sp. z o.o.
ul. Poznańska 2,
Siemianice 55-120 Oborniki
Śląskie
Customer Service Office
tel: +48 71 310 41 41, e-mail: biuro@technisat.com
Open Monday to Friday from: 8:00-16:00
To Next Page
Loading...
