TechniSat DIGIT S3 DVR User Manual

75
DE
EN
3.2 Periods of non-use
During a thunderstorm or lengthy period of non-use (e.g. when on vacation), the
receiver should be disconnected from the mains and the antenna cable removed.
Before you disconnect the receiver from the mains, you should first switch it to
standby mode and wait until the red LED light is displayed.
3.3 Important notes on operation
Operation of the digital receiver is simplified by using the so-called "On Screen
Displays" (OSD). This also means that the number of keys on the remote control
unit can be reduced.
All functions are displayed on screen, and can be controlled by means of a few
control buons.
Functions that are logically related are combined into a "MENU". The selected
function is highlighted. The red, yellow, green and blue “function keys” are
indicated by coloured bars at the boom of the screen. In the various menus,
these coloured bars represent dierent functions, which can be implemented
by pressing the appropriately coloured keys (multi-function keys) on the remote
control. The "function keys" are only active when a brief description is displayed
in the appropriate field. The key designations and terms that appear in the OSD
menu are shown in bold type in this instruction manual.
Help: Where available, press the blue function key in the menus to display help
text and press again to close the help window.
3.4 Important information on data security
Before handing your receiver over to your supplier for maintenance purposes, we
recommend that you remove all storage media or data carriers.
Restoring data is not part of maintenance or repair work. TechniSat accepts no
responsibility for the loss of, or damage to, data during repair work.
3.5 Remote control/Replacing the baery
> Open the cover on the baery compartment on the back of the remote
control by pressing gently at the point indicated and sliding it in the
direction of the arrow.
> Insert the supplied baeries, ensuring correct polarity, (indicator visible in
baery compartment).
> Close the baery compartment again.
Digit S3 DVR_V2.indd 75Digit S3 DVR_V2.indd 75 23/02/2022 08:5323/02/2022 08:53

TechniSat DIGIT S3 DVR Specifications

General

Tuner type	Digital
Demodulation	QPSK
Product color	Black
Number of tuners	1 tuner(s)
Audio output channels	- channels
On Screen Display (OSD)	Yes
Electronic Program Guide (EPG)	-
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2
Package weight	994 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	6.2 W
Video codecs	H.264
Cables included	HDMI
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi	No
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Signal source	Cable, Ethernet (RJ-45), Satellite
Digital signal format system	DVB-S, DVB-S2

Weight and Dimensions

Depth	130 mm
Width	180 mm
Height	44 mm
Weight	380 g