98
12 Troubleshooting
If the device does not operate as intended, check the table below for information.
Symptom Possible cause/remedy
The device cannot be switched on. The device is not being supplied with power.
Connect the power supply unit correctly to the
socket and to the device.
No sound can be heard. Increase the volume.
The display does not switch on. Disconnect the unit from the mains for a short time.
Poor reception via DAB+/FM. Change the position of the antenna or the
DIGITRADIO 50 SE.
The device cannot be operated. Disconnect the device from the power supply and
then reconnect it.
Device automatically switches to
standby
The auto standby function switches the device
to standby aer approx. 15 minutes if there is no
playback or if the volume is reduced.
If the malfunction has not been resolved, even aer performing the checks described,
please contact the Technical Hotline.
To Next Page
Loading...