Why does my Technivorm Coffee Maker coffee taste weak or bitter?
The coffee may taste weak or bitter because the amount of coffee used for brewing is incorrect. To brew to ECBC standard, use 60 grams of coffee per litre of water. Also, ensure that you are using standard filter grind coffee.
Why is my Technivorm Coffee Maker thermos not keeping coffee hot?
If the thermos is not keeping coffee hot, it could be due to a defective thermos. Contact authorized service centre for replacement. It also could be caused by possible damage to carafe vacuum seal.
What to do if Technivorm Coffee Maker filterholder is overflowing?
If your Technivorm Coffee Maker's filter holder is overflowing, it could be due to using too much coffee or the coffee grind being too fine. Try using less coffee or selecting a coarser grind.
Why does Technivorm Coffee Maker brew cycle take too long?
If the brew cycle of your Technivorm Coffee Maker is taking longer than usual, it may be due to limescale buildup. Descale your coffee maker.
What to do if my Technivorm Moccamaster THERMOSERVE power light is on, but it is not working?
If the power light is on but the coffee maker isn't working, there could be a mineral buildup in the heating element. Refer to the descaling instruction manual. Also, ensure that the water container is filled.
What to do if my Technivorm Moccamaster THERMOSERVE Coffee Maker brew cycle is taking more than 6 minutes?
If the brew cycle is taking more than 6 minutes to complete, the coffee brewer may need to be descaled. Please refer to the descaling instructions in the manual.
What to do if water is dripping out of my Technivorm Moccamaster THERMOSERVE very slowly?
If water is dripping out very slowly, the brewer may be clogged with mineral deposits and needs descaling. Refer to the descaling instructions in the manual.
How to fix Technivorm Coffee Maker if it is not working and the lights are off?
If the brewer is not working and the lights are not illuminated, check to ensure the brewer is plugged into the socket.
Why is the hot plate staying on after brewing is complete on my Technivorm Coffee Maker?
If the hot plate stays on after brewing is complete, your brewer has a manual power off switch. Manually turn the power switch off.
Covers intended use, suitability for various users, and general operating precautions.
Instructions for keeping children away from the appliance and packaging.
Covers voltage, power cords, plugs, and extension cord usage.
Warnings on placement, hot components, liquids, and appliance misuse.
Provides recommended coffee quantities for different water volumes.
Lists and illustrates the various parts of the coffee machine.
Explains the function of each button and indicator light.
Guidance on installing the machine and initial cleaning cycles.
Step-by-step instructions for brewing coffee.
Explains why descaling is crucial and recommends a frequency.
Instructions for cleaning the airpot and filter holder.
Guidance on regularly cleaning the inside of the coffee machine.
Recommendations for storing the machine and preventing frost damage.
Contact information for ordering parts and arranging repairs.
Details on what the warranty covers and what is excluded.
Lists common problems and their suggested solutions.
General| Type | Drip Coffee Maker |
|---|---|
| Water Tank Capacity | 1.25 liters |
| Voltage | 120 volts |
| Brewing Capacity | 1.25 liters / 10 cups |
| Carafe Type | Thermal |
| Material | Metal housing, BPA-free plastic |
| Heating Element | Copper |
| Dimensions | 12.75 x 6.50 x 14.00 inches |
| Certification | SCA Certified |
| Brew Time | 6 minutes |
To Next Page
