Slide the selector switch to either Fahrenheit or Celsius.
Re-attach the top and bottom housings.
Convert from Outdoor to Indoor Use (See above illustrations 3~6)
Your suction cup thermometer is assembled for outdoor use. If you want to
attach the thermometer to the inside of the window, follow these steps:
Pull the bottom housing away from the top housing.
Pull the suction cup away from the top housing.
Rotate the bottom housing and suction cup 180 degrees.
Push the suction cup into place.
Re-attach the top and bottom housings.
Install the Thermometer
The thermometer can be mounted to a window, mirror, or nay clean and
smooth, non-porous surface. Suction cups will not hold on wood or plaster.
Clean surface of any oils or other foreign matter.
To attach the thermometer, press firmly the suction cup attaches to the
housings, making sure the suction cup makes a tight bond with the
mounting surface.
Do not use in direct rain and direct sunlight.
To Next Page
Loading...
Need help?
General
