Technoline WS9612 - Page 23

EN9
150
Belfast
BEL
151
Birmingham
BIR
152
Cardiff
CAR
153
Glasgow
GLW
154
London
LON
155
Manchester
MAN
156
Newcastle upon Tyne
NEC
157
Plymouth
PLY
158
United States(US)
Los Angeles
LAX
159
New York
NYC
160
Washington
WAS
161
Lithuania（LT）
Vilnius
VNO
162
Bulgaria（BG）
Sofia
SOF
163
Romania（RO）
Bucharest
BUH
164
Cyprus（CY）
Nicosia
NIC
165
Northen Ireland（NI）
Belfast
BFS
Note.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time
mode from the set mode.
Setting the daily alarms
 Press button B3 once, LCD display the icon , the alarm function is ON, then press
once button, the icon will disappear from the LCD, the alarm function is OFF
 Press SET button to switch to alarm time display mode, then press and hold SET button
for 3 seconds until hour of the alarm time starts to flash. Use the “+” and “-” buttons to set
the required hour.
 Press SET button to confirm your setting, the minute of the alarm time starts to flash. Use
the “+” and “-” buttons to set the required minute.
 Press SET button to confirm your setting, the snooze time starts to flash. Use the “+” and
“-” buttons to set the snooze time.
 Press SET button to confirm your setting and to end the setting procedure.
Notes.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time
mode from the alarm time set mode.
 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In
this case the alarm will be repeated automatically after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst
the alarm signal is active.
Switching off the alarm signal
 When the alarm is ringing, press any button except the “snooze” buttonB5 to stop the
alarm signal. It is not necessary to reactivate the alarm. It will ring again this time next day.