DIY Synth - Manual
4
Making your DIY
Synth
Components
Parts:
1) 1x Breadboard
2) 1x 9v Battery Clip
3) Selection of Jumper Wires (Colour coded and cut to size)
4) 1x 8 Ohm Speaker
5) 1x 1k Ohm Resistor
6) 1x 4.7K Logarithmic Potentiometer (Volume Control)
7) 2x 470K Linear Potentiometer (Frequency and Pitch Control)
8) 1x NE556 Timer IC (Integrated Circuit)
9) 1x 10uf Electrolytic Capacitor (Cylindrical and Black)
10) 2x 10nf Ceramic Capacitor
Check your components to make sure you have all the parts to build
your DIY Synth!
To Next Page
Loading...