TechPlay COMMANDER - Connectivity and Power Management; Bluetooth Device Connection

9
BLUETOOTH CONNECTION
- THIS UNIT HAVE BLUETOOTH FUNCTION, WHICH CAN CONNECT AND PLAY MUSIC FROM
YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE).
- PRESS FUNCTION BUTTON REPEATEDLY TILL DISPLAY SHOWS “BT”, THEN “BT” WILL BE
FLASHING, IT MEANS THE UNIT IS READY FOR CONNECTION WITH YOUR BLUETOOH
DEVICE.
- SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT
“COMMANDER” BLUETOOTH EQUIPMENT FOR CONNECTION.
- AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT, “BT” IN LCD DISPLAY WILL
STAY ON, THEN START TO PLAYBACK YOUR DEVICE.
- SWITCH TO OTHER MODE TO DISCONNECT THE BLUETOOTH CONNECTION.
EARPHONE JACK & LINE OUT SOCKET
- THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER /
SPEAKER BY 3.5MM EARPHONE JACK.
- THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND
SPEAKER) BY LINE-OUT RCA JACK AT REAR CABINET.
POWER SAVING FEATURE:
TO SAVE ENERGY, IF THERE IS NO AUDIO SIGNAL FROM CD / TURNTABLE / AUX IN / USB /
BLUETOOTH FOR A PERIOD OF OVER 10 MINUTES, THEN THE UNIT WILL AUTOMATICALLY
SWITCH TO STANDBY MODE.