18-Month Battery Life
The mouse consumes little power and offers a long battery life of up
to 18 months without changing battery. However please note that the
actual battery life may vary based on user and computing conditions.
Start for using
1.Connecting the Receiver
Take out USB Nano receiver and plug it into a free USB port in your
computer. The Plug & Play function automatically.
USB Port Nano receiver
2
1
2
2. The RF 2.4GHZ optical mouse uses one AA battery (Battery is not
included). Open the battery cover. Insert the batteries into the
compartment, ensuring they correspond with the polarity marking.
3. Replace the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the
mouse. The red LED of the power indicator at the top of the mouse
will flash. (DPI will flash about 5-10 seconds, which is pairing process)
5. Now the mouse is ready for using.
Note:
1. Pairing process will stop if loading the battery first and then plug the
Nano receiver beyond 5-10 seconds.
2. Make sure that the polarity of the batteries is correct. The positive (+)
and negative (-) ends of each battery must match the positive (+) and
negative (-) markings in the battery housing.
To Next Page
Loading...
