Tecno Control TS236 - Technical Characteristics of Oxygen Transmitter; O2 Zirconium Oxide Sensor TS236 Probe Specs

IST-2236.ZO01.02/A User Instructions Page 2/4
TECNOCONTROL S.r.l. - Via Miglioli, 47 20090 SEGRATE (MI) - Tel. 02/26922890 - Fax 02/2133734
CONTENTS
TECHNICAL CHARACTERISTICS ............................................................ 2
O
2
ZIRCONIUM OXIDE SENSOR (TS236 Probe) ........................................................ 2
SERVICE ................................................................................................... 2
DESCRIPTION ........................................................................................... 2
INSTALLATION ......................................................................................... 3
EXTERNAL CONNECTIONS .................................................................... 3
UNIT USE .................................................................................................. 4
SERVICE INSPECTIONS .......................................................................... 4
O
2
SENSOR CALIBRATION CHECK ............................................................................. 4
PROBE BODY CLEANING ............................................................................................ 4
TECHNICAL CHARACTERISTICS
O
2
ZIRCONIUM OXIDE SENSOR (TS236 Probe)
• Power Supply: 230 Vac
• Output: 4÷20 mA (0-25% O
2
)
• Measuring range: 0-25%
• Resolution: 0.1%
• Calibration: automatic
• Working Temperature: Probe 0 / +800°C
TS236 - Standard Probe Body 300°C
TS237 High Temperature Probe Body 600°C
• Response Timing T
90
: < 10 seconds
• Repeatability: 1% on signal
• Medium Life: >160.000 Hours
SERVICE
We suggest to allow service inspections only to trained and qualified people,
especially for sensors test and calibration.
On demand TECNOCONTROL is able to offer programmed service agreements each
six months (beginning and half season) or once a year depending on the type of boiler
and its use.
The service normally includes functioning tests of the unit, test and calibration of
Oxygen sensor, replacement (when necessary) of O
2
sensor.
Documento / Document name: IST-2236.ZO01.02-A_TS236-TS237 (EN).doc
Oggetto / Subject : TS236-TS237 (EN)
Rev. Data / Date Da / By Note
A 07/05/2007 UT/FG Aggiunta Intestazione Sonda TS237