Need help?Do you have a question about the Tecno-gaz Europa B xp and is the answer not in the manual?
General| Brand | Tecno-gaz |
|---|---|
| Model | Europa B xp |
| Category | Laboratory Equipment |
| Language | English |
Describes the controls and indicators on the front panel with the door closed.
Describes the controls and indicators on the front panel with the door open.
Details the components and connections on the rear of the autoclave.
Explains various safety warning symbols used in the manual.
Lists the built-in safety features of the autoclave.
Provides important safety instructions and warnings for operation.
Guidelines for the proper disposal of the autoclave.
Details the physical specifications such as dimensions, weight, and material.
Outlines the electrical requirements including power, voltage, and fuses.
Provides details about the autoclave's chamber, including pressure and temperature limits.
Specifies the volume, usable cycles, and material of the clean water tank.
Details the volume, usable cycles, and material of the used water tank.
Specifies the diameter and filtering capacity of the bacteriological filter.
Describes the material and dimensions of the tray carrier.
Details the material, dimensions, and quantity of the trays.
Instructions for powering on the autoclave using the general switch.
Steps for automatically filling the pure water tank with demineralized water.
Procedure for manually filling the pure water tank if the pump fails.
Specifies the required quality and parameters for water used in the autoclave.
Guidelines for correctly placing materials inside the sterilization chamber.
How to select and start a sterilization program.
Information on cycle completion signals and door unlocking procedure.
Instructions for safely removing sterilized items from the chamber.
Steps to empty the used water tank after a cycle.
Procedure for voluntarily stopping a sterilization cycle.
Overview of the different types of sterilization cycles available.
Details on standard operating cycles and temperature selections.
Information on using the autoclave for unattended night cycles.
Explains the purpose and use of Helix, Bowie & Dick, and Vacuum tests.
A comprehensive list of error codes, their causes, and remedies.
Instructions on when and how to replace the bacteriological filter.
Procedure for cleaning the sterilization chamber using recommended methods.
How to clean the door seal to ensure proper closure.
Steps for adjusting the door lock pressure for optimal sealing.
Guide for replacing the thermographic paper roll in the printer.
How to interpret status indicators for the printer cover and paper.
Steps to change the display language of the autoclave.
Procedure for setting the current hour on the autoclave display.
Procedure for setting the current minutes on the autoclave display.
Note on setting seconds; they are not modifiable.
Steps to set the current date (day, month, year).
Procedure for setting the current month.
Procedure for setting the current year.
How to view the memorized atmospheric pressure; modification is not allowed.
How to choose between pump or conditioner for water loading.
Troubleshooting steps when the autoclave fails to dry items properly.
Advice on addressing a white residue inside the autoclave chamber.
Troubleshooting steps for blueish-green stains in the chamber.
Solutions for unexpected sterilization cycle interruptions, e.g., electrical connections.
Troubleshooting issues where the autoclave is unresponsive to commands.
Solutions for problems preventing the autoclave printer from operating.
Explanations and remedies for various types of stains appearing on instruments.
Instructions for connecting the WATER CLEAN demineralizer apparatus.
Detailed steps for connecting the WATER CLEAN to the autoclave and faucet.
Procedure for replacing the resin cartridge in the WATER CLEAN unit.
To Next Page
