Need help?Do you have a question about the Tecnodue I.T.S. PT 250 and is the answer not in the manual?
Describes the main components of the basic machine, including cylinders, clamps, and frame.
Details the components and function of the electric facing tool, including blades and engine.
Explains the heating mirror, its components like the PTFE coated plate, and the thermostat.
Explains the functions, display, and operation of the electronic thermostat for temperature control.
Provides essential safety rules and obligations for machine operation, covering transport, electrical, and general safety.
Details the controls and levers of the hydraulic unit, explaining their functions for operation.
Provides step-by-step instructions for operating the hydraulic unit during the welding process.
Describes how to use and remove beep-beep insert reductions for pipe fittings.
Introduces the machine's capability for various pipe welding configurations.
Covers essential steps for preparing the machine and working area before welding.
Guides on positioning pipes and performing the facing operation for welding preparation.
Explains how to measure inertial pressure, a critical parameter for welding.
Details the five phases and times involved in the butt welding cycle.
Provides visual criteria for assessing the quality of the butt welding result.
Lists detailed welding parameters for PE and PP materials based on DVS norms.
Provides guidance on cleaning and maintaining the basic machine components.
Covers cleaning and maintenance procedures for the facing tool, including blades and pulleys.
Details handling and maintenance of the heating mirror, including PTFE coating care and temperature checks.
Outlines maintenance requirements for the hydraulic unit, including oil level checks and replacement.
Addresses common issues with the basic machine, such as coupling connection and movement problems.
Provides troubleshooting steps for the facing tool engine, blades, and material removal issues.
Covers problems with the hydraulic unit engine starting and replacement procedures.
Offers solutions for the heating mirror not warming up or having temperature issues.
Illustrates the electrical connection diagram for the thermostat and heating mirror.
Shows wiring diagrams for the facing tool and hydraulic unit engines.
Presents the schematic diagram of the hydraulic system.
General| Brand | Tecnodue |
|---|---|
| Model | I.T.S. PT 250 |
| Category | Industrial Equipment |
| Language | English |
To Next Page