Need help?Do you have a question about the Tecnolux 12066 and is the answer not in the manual?
General| Brand | Tecnolux |
|---|---|
| Model | 12066 |
| Category | Test Equipment |
| Language | English |
Verify delivery for completeness and damage.
Introduction to the device and importance of manual.
Key specifications and measurements of the headlight tester.
Explains warning symbols used within the manual for safety.
Advises attention to warning symbols present on the device itself.
The device is for testing and aligning vehicle headlights and is mobile.
Details the height adjustment of the optical box using a slider and scale.
Explains the function and activation of the laser pointer for alignment.
Describes the analogic luxmeter with multiple intensity marker ranges.
Details the digital LCD display and control knob for the digital version.
Explains the panel inside the optical box for verifying beam position and orientation.
Mentions the visor can be equipped with mirror or laser for alignment.
Instructions for safely handling the machine while it is crated.
Lists all components included in the machine's packaging.
Lists essential rules to prevent damage to the operator and the machine.
Covers safe working environment, temperature, ventilation, and electrical hazards.
Addresses malfunctions, original parts, and warranty implications for safety.
Instructions for attaching the column's bottom half to the base.
Details inserting the optical box sliding system onto the column.
Instructions for joining the top and bottom halves of the main column.
Step-by-step guide to mounting the optical box onto the sliding system.
Procedure for installing the visor onto the column.
Steps to ensure the headlight tester is perfectly level for accurate measurements.
Steps to prepare the vehicle for the headlight test.
Guidelines for selecting and preparing a suitable, level working surface.
Warning about toxic exhaust gases and the need for ventilation.
How to place the headlight tester in front of the vehicle.
Guide for using the optional laser pointer for precise alignment.
Warning about not looking directly at the laser and avoiding exposure to others.
Steps for aligning the tester using the mirror visor.
Instructions for aligning the optical chamber using vehicle details and visor projection.
Detailed safety information regarding laser class and potential hazards.
How to read and set the initial headlight tilt based on manufacturer specs.
Steps for checking and adjusting the low beam projection and intensity.
Steps for checking and adjusting the high beam projection and intensity.
Steps for testing and aligning fog beams.
Instructions for replacing batteries in the laser visor and digital unit.
Routine cleaning and basic maintenance recommendations.
Information on the machine's materials and proper disposal methods.
Advice on checking the machine upon delivery for damage or missing parts.
Procedures for making warranty claims and returning defective goods.
To Next Page
