106 User’s manual
Turntable stops under strain, but the motor is running
➥
Turntable fails to clamp rims
➥
➥
Control pedals do not return to their position
Pedal return spring broken.
➥
Bead breaker cylinder lacks force, fails to break beads and
leaks air
Silencer plugged.
➥Replace the silencer
Cylinder seals worn.
➥Replace the seals.
➥
After clamping, the tool head does not rise or rises too far
from rim
lampingplatenotadjusted.
➥Adjust the plate.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥
The lubricator does not work
No oil in lubricator.
➥
Lubricator broken.
➥
To Next Page
Loading...
