4-111
(9) Frequency lower limit ( Setting = 8).
. When 04-07 is set to 8 (lower limit of frequency reference), the multi-function analog
input AI2 can be used to adjust the lower limit of frequency reference.
. maximum output frequency (F
max
, 01-02) = 100%.
. The actual lower limit is determined by the corresponding maximum value of 00-13
(frequency lower limit) setting value and multi-function analog input AI2.
. Please refer to the following figure 4.3.47.
Figure 4.3.47 Adjustment of lower limit of frequency reference
(10) Jump frequency 4 ( Setting = 9)
. When 04-05 is set to 9 (Jump frequency 4), the multi-function analog input AI2 can
be used to adjust the Jump frequency 4.
. maximum output frequency (01-02, F
max
) = 100%.
. When 11-08 to 11-10 are set to 0.0Hz, the Jump frequency function is turned off.
Refer to the following figure 4.3.48.
Figure 4.3.48 Jump frequency 4 Setting Operation
To Next Page
Loading...
