TECO A510-2001-H - Page 167

4-113
04-11
AO1 function Setting
Range
【0】:
Output frequency
【1】:
Frequency command
【2】:
Output voltage
【3】:
DC voltage
【4】:
Output current
【5】:
Output power
【6】:
Motor speed
【7】:
Output power factor
【8】: AI1 input
【9】:
AI2 input
【10】:
Torque command
【11】:
q -axis current
【12】:
d-axis current
【13】:
Speed deviation
【14】:
Retain
【15】:
ASR output
【16】:
Retain
【17】:
q-axis voltage
【18】:
d-axis voltage
【19】:
Retain
【20】:
Retain
【21】:
PID input
【22】:
PID output
【23】:
PID target value
【24】:
PID feedback value
【25】:
Output frequency of the soft starter
【26】:
PG feedback
【27】:
PG compensation volume (VF+PG)
04-12
AO1 gain value
Range
【
0.0~1000.0】%
04-13
AO1 bias-voltage value
Range
【
-100.0~100.0】%
04-16
AO2 fucntion Setting
Range
Range and definition are the same as those of 04-11
04-17
AO2 gain value
Range
【
0.0~1000.0】%
04-18
AO2 bias-voltage value
Range
【
-100.0~100.0】%
.For the analog output and related paramters, please refer to the following figure 4.3.50 .