TECO L510S Series - Page 100

4-55
05- Preset Frequenc
y
Selections.
05- 00 Preset Speed Control mode Selection
Range
【0】:Common Acceleration / Deceleration.
【1】: Individual Acceleration / Deceleration for each preset speed 0-7.
05- 01 Preset Speed 0 (Keypad Freq)
05- 02 Preset Speed 1
05- 03 Preset Speed 2
05- 04 Preset Speed 3
05- 05 Preset Speed 4
05- 06 Preset Speed 5
05- 07 Preset Speed 6
05- 08 Preset Speed 7
Range
【0.00 ~ 599.00】 Hz
05-17 Preset Speed 0 Acceleration time
05-18 Preset Speed 0 Deceleration time
05-19 Preset Speed 1 Acceleration time
05- 20 Preset Speed 1 Deceleration time
05- 21 Preset Speed 2 Acceleration time
05- 22 Preset Speed 2 Deceleration time
05- 23 Preset Speed 3 Acceleration time
05- 24 Preset Speed 3 Deceleration time
05- 25 Preset Speed 4 Acceleration time
05- 26 Preset Speed 4 Deceleration time
05- 27 Preset Speed 5 Acceleration time
05- 28 Preset Speed 5 Deceleration time
05- 29 Preset Speed 6 Acceleration time
05- 30 Preset Speed 6 Deceleration time
05- 31 Preset Speed 7 Acceleration time
05- 32 Preset Speed 7 Deceleration time
Range
【0.1 ~ 3600.0】s
 When 05- 00 =【0】Acceleration /Deceleration 1 or 2 set by parameters 00-14/00-15 or 00-
16/00-17 apply to all speeds.
 When 05- 00 =【1】Individual Acceleration /Deceleration apply to each preset speed 0-7.
Parameters 05-17 to 05-32.
 Formula for calculating acceleration and deceleration time:
V/F mode:
SLV mode: