Sending MIDI File Dump
Tap the Flash button 4 three times while holding
down the Record button, the Segment Display
reads "OUT" indicating the controller is ready to
send a le.
Note: During le dump, all other operations will not
function. Functions will automatically return when
the le dump is completed.
1. File dump will be interrupted and stop if errors
occur or power failure.
Implementation
1. During receiving and sending MIDI data, all MIDI
scenes and channels being run will automati-
cally paused if there is no response within 10
minutes.
2. During receiving and sending le dump, the
controller will automatically search for or send
Device ID of 55H(85), a le named DC2448 with
an extension of "BIN(SPACE)".
3. File dump allows this controller to send its MIDI
data to next unit or other MIDI devices.
4. There are two types of le dump mode de-
scribed as below:
Open Loop Mode
Close Loop Mode
5. The controller will send and receive Note On
and Note O data via the Flash buttons.
CONTROLLER RECEIVER
MIDI OUT MIDI OUT MIDI IN MIDI IN
CONTROLLER RECEIVER
MIDI OUT MIDI OUT MIDI IN MIDI IN
Note No. Velocity Functions
22-69 24 Program
master
turn on or o
program 1-48
70-93 24 Channel
intensity
Activate Channel
1-24
94 Full-On
95 Dark
96 Hold
97 Turn on or o
AUDIO
98 CHNS ◀▶ SCENES
99 Double Preset Mode
100 Single Preset Mode
101 Step
102 Black Out
English version
To Next Page
Loading...
Need help?
General
