TecTake 400362 - Operation Guide; Taking Accessories; Install; Take Off Battery; Place a Garbage Bag

3
Step 1 Taking accessories
Take all accessories out of the package
1. Touchless automatic lid(head)
2. Retaining ring bags(press ring)
3. Container(body)
Accessory 1 should be used together with accessory
2 and accessory 3
Step2 Install /take off the battery
Install battery
1.take the lid down
2.turn it back
3.press the battery cover with a arrow mark.
4.put the batteries into the battery box. (notice the
negative and positive indication)
5.close the battery cover
Take off battery
1.take the lid down
2.turn it back
3.press the battery cover with a arrow mark
4.get the batteries out of the battery box.
5.close the battery cover
Please follow the above step to change
new batterys when power is low.
Step 3 Place a garbage bag
1.cover the press ring with a garbage bag
2.put the press ring into the body
3.put the head on the body
Step 4 Turn on the power
-turn on the power switch on the rear of the head
-an infrared induction light turns red and flickers, it
begins to work.
Turn the edge of the
garbage bag out
ON
OFF
OPERATION GUIDE