39
ENGINE HOLDER 670300
To assist in reassembly of the engine block and it's
components an Engine Holder, part number 670300, has
been developed. Attach to the crankcase of the engine
with the blower housing base screws and insert the other
end into a bench vise to hold crankcase while inserting
engine components.
AIR GAP GAUGE 670297
Used on all TC200 and all TC300 engines used on rotary
mower applications.
AIR GAP GAUGE 670321
Used on TC300 non-rotary mower engine applications.
SEAL PROTECTOR AND INSTALLER 670303
Used on the PTO oil seal.
BEARING INSTALLER 670304A
Used to install the PTO bearing.
SEAL PROTECTOR AND INSTALLER 670301
Used on the flywheel end oil seal.
BEARING INSTALLER 670302
Used to install the bearing in the flywheel end.
AIR GAP GAUGE .0125 (.317 mm)
PART NO. 670297
AIR GAP GAUGE .030 (.762 mm)
PART NO. 670321
670302
670303
670304A
670301
670300
Not For Resale
www.SmallEngineDiscount.com
To Next Page
Loading...
