38
• The appliance will be in standby mode. At this stage, you can select a
program by pressing the corresponding button. The button light flashes
and the recipe time information will be displayed.
– The lid cap need to be well placed to ensure the vacuum function.
• Press the <<Start/Cancel>> button and the appliance will start. At the
end of the recipe, the blender stops automatically. The appliance beeps
5 times.
– If using the blender function, once the program is complete, press the
middle of the lid cap and remove the lid cap, then open the lid.
• You can also stop the blending during the cycle by pressing the <<Start/
Cancel>> button to cancel the program.
– Before each auto program, vacuum function will be operated for 60-90
seconds (depends on cooking program).
• Don’t use this jar for hot preparation.
• Don’t immerse the lid in water
CAUTION : Do not remove the lid cap (A1) from the lid during vacuum.
To Next Page
Loading...
