12
USING YOUR APPLIANCE
Refer to figures page 3.
• Put the appliance on a flat, stable, heat-resistant surface away from
sources of heat or water splashes.
• Always disconnect the appliance from the mains before changing or
touching parts.
1. Prepare ingredients:
Prepare ingredients according to the recipe. Large ingredients should be
chopped to a length of no more than 4cm and ice cubes should not
be bigger than 3cm, for optimal performance. Remove any tough skin,
fruit stones and meat bones from ingredients. Rinse thoroughly and add
to the jar (Fig. 1), taking care not to exceed the recommended maximum
capacity in the table after.
2. Lock the lid:
Place the lid on the jar and turn it clockwise until it is locked (Fig. 2).
The lid features a safety mechanism that prevents the appliance from
switching on when the lid is not attached correctly.
3. Insert the lid cap:
Insert the lid cap into the middle of the lid and turn it clockwise to secure
it in place (Fig. 3).
4. Insert the jar on the motor unit:
Align the jar with the handle slot on the motor unit and push down to
insert it into place (Fig. 4).
5. Plug in the appliance:
Plug in the appliance, it will make a beep sound and the digital display
will light up (Fig. 5).
To Next Page
Loading...
