6
A. SPEED selection (1-2-3)
ON/OFF switch
B. Timer setting (up to 7.5H)
Oscillation
C. Mode selection (Night/ Nature/
Normal)
A C
B
NIGHT MODE
NATURE MODE
NORMAL
Operate the fan and choose the
speed you require using the but-
tons on the control panel:
• START
• TIMER ( up to 7.5H)
• MODE
• SPEED (1-2-3)
The control panel has four buttons which are used to start your appliance and select the ventilation speed. You
can select your preferred ventilation setting by pressing “MODE” button.
For NORMAL MODE, you can select your preferred ventilation setting by pressing SPEED (1-2-3).
For NIGHT or NATURAL MODE, the ventilation speed is software programed to provide you with maximum
comfort.
Turn the appliance off by pressing button either on the control panel or the remote control.
The oscillation function can be activated only with the remote control by pressing on the button .
By pressing “TIMER” button, you can set the time needed. The leds will indicate the timing you are setting. When
numerous leds are illuminated, the timing is the sum of all the figures related to each led.
IMPORTANT: You are advised to unplug the appliance when not in use.
6 - CLEANING
• Your appliance must be unplugged before proceeding with any cleaning work.
• You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
To Next Page
Loading...
