6
USING YOUR APPLIANCE
• Put the appliance on a flat, stable, heat-resistant surface away from
sources of heat or water splashes.
• Position the jug (A or B) correctly on the motor unit Fig. 1 and 2.
• After removing a bowl from the base, wait at least 6 seconds before
repositioning another bowl.
GLASS JAR FOR HOT PREPARATION:
• Add the ingredients into the jug without exceeding the maximum level
indicated:
– 1400 ml max for hot preparation
Automatic function:
How to use :
• Lock the lid on the jug and place the lid cap in position on the lid. The
appliance only starts up once the jug and lid are correctly in place.
• When you plug in the appliance and switch it on, it will make a beep,
and the screen will light up.
• The appliance will be in standby mode. At this stage, you can select a
program by pressing the corresponding button. Button light flashes and
the recipe time information will be displayed.
• Press the start/stop button. Then the appliance starts to work
automatically.
• At the end of the recipe, the blender stops automatically. The appliance
beeps 3 times.
• You can also stop the blending during the cycle:
– press the «Start/stop» button to pause the program (up to 5 minutes,
after which the unit returns to the home screen)
– press the «cancel» button to stop the program and return to the home
screen.
• For hot programs and Heat function, if the power shuts off during
cooking, within 3 minutes if the power is turned back on, the appliance
will restart automatically.
– If the appliance is left unused for 3 minutes, the screen light will go off
and only the start/stop button will remain on.
CAUTION :
• Do not shake the motor unit or the jug when the blender is in use.
To Next Page
Loading...
