8
The longest working time can not be more than 3 minutes.
• Blend : allows you to freely control the way you want to blend.
Press the blend button, the screen indicates « P » corresponding
to the pulse function but you can choose the blending speed
from 1 to 9 by pressing the setting +/- buttons (L). « H » is the maximum
speed. Then press start/stop button. You can set up the working time by
pressing the setting +/- button (L) between 5 seconds and 3 minutes.
The remaining time appears on the screen. Wait for the blender to stop
automatically. The appliance beeps 3 times.
• Heat : allows you to freely control the way you want to heat.
Press the heat button, the screen indicates « 75 » but you can
choose the heating temperature from 40° up to 100° by pressing
the setting +/- buttons (L). You can set up the working time by pressing
the setting +/- buttons (L) between 5 minutes and 90 minutes. Press
start/stop button. The remaining time appears on the screen. Wait for
the heating to stop automatically. The appliance beeps 3 times at the
end of the program. You can also stop the heating during the cycle by
pressing the start/stop button or the cancel button.
PLASTIC TRITAN JAR FOR COLD PREPARATION
• Add the ingredients into the jug without exceeding the maximum level
indicated:
– 1750 ml max for cold jar
Automatic functions
How to use :
• Lock the lid on the jug and place the lid cap in position on the lid. The
appliance only starts up once the jug and lid are correctly in place.
• When you plug in the appliance and switch it on, it will make a beep,
and the screen will light up.
• The appliance will be in standby mode. At this stage, you can select a
program by pressing the corresponding button. The button light flashes
and the recipe time information will be displayed.
– Before each auto program, you can use vacuum function by pressing
‘vacuum button’, duration: 1min10s
– When you use the vacuum function, ensure the lid cap is screwed on
tight.
To Next Page
Loading...
