C- INSTALLATION OF YOUR PRODUCT
15
WARNING!
It is forbidden to insert the plug into multiple socket and to use extension cord. (Picture 9)
Do not contact the cables of your product, which are connected to the mains, to hot surfaces.
The product will start when you insert the plug into the outlet as shown in picture 8.
The outlet you will use must be grounded. Furthermore, the outlet to be used must have the resistance of
or a competent electrician with regards to the fuse that should be present on the mains where the outlet is
connected.
Mains voltage and frequency must be same with the value written on the label inside your product. If your
-
ing a voltage regulator. You can get assistance from an expert electrician with this regard.
Do not place your product's cord onto passageways. This may cause you to get injured and damage your
cooler. (Picture 10)
To Next Page
Loading...
