D- USING YOUR PRODUCT
17
Temperature setting of your product has made at the factory in a manner that it is operated under the
most appropriate conditions.
Be careful for always placing frozen product inside your product
Preservation temperature of the products can be observed from the digital indicator or thermostat
under its canopy and adjusted by means of an electronic thermostat.
Set value of your product has been adjusted at the production plant as -22°C. This value is the value
that can protect the products inside of your device without spoiling under any conditions.
When you run your product at factory set value, you get the best result in terms of both the perfor-
mance and energy consumption.
Run your device empty for at least three (3) hours. Therefore inside of your product will be cooled
down in the best way.
To Next Page
Loading...
