THE GLOBAL SOURCE FOR PROVEN TEST & MEASUREMENT TECHNOLOGY
TEN TEGAM WAY, GENEVA, OHIO 44041
PHONE 440-466-6100 FAX 440-466-6110
WARRANTY OF TRACEABILITY
The reference standards of measurement of Tegam, Inc., are compared with the
U.S. National Standards through frequent tests by the U.S. National Institute of
Standards and Technology. The Tegam working standards and testing apparatus
used are calibrated against the reference standards in a rigorously maintained
program of measurement control.
The manufacture and final calibration of all Tegam instruments are controlled
by use of the Tegam reference and working standards and testing apparatus in
accordance with established procedures and documented results. (Reference
ANSI/NCSL Z540-1-1994)
Final calibration of this instrument was performed with reference to the mean
values of the Tegam reference standards or to ratio devices that were verified
at the time and place of use.
DISCLAIMER of IMPLIED WARRANTIES
The foregoing warranty of Tegam is in lieu of all other warranties, expressed or
implied. Tegam specifically disclaims any implied warranties of merchantability or
fitness for a particular purpose. In no event will Tegam be liable for special or
consequential damages. Purchaser’s sole and exclusive remedy in the event any item
fails to comply with the foregoing express warranty of Tegam shall be to return
the item to Tegam, shipping charges prepaid, and at the option of Tegam obtain
a replacement item or a refund of the purchase price.
Ten Tegam Way, Geneva, Ohio 44041 Phone: 440-466-6100 Fax: 440-466-6110
To Previous Page
Loading...