Connection to Unknown: Four-terminal, shielded, connections are provided by the KELVIN KLIPS®
cable assembly (Tegam Part Number 43072) supplied with the Model
252.
Outputs: Analog signals of 1V per 1,000 counts, 1kΩ source resistance is available at rear panel.
L, C, R, or G, with simultaneous output of D for L or C.
Power Consumption: 4 watts typical.
Power Requirements: 100 to 125V or 200to250V, 50/60Hz.
Fuse: 110V: 1/16A 250VAC Slow-Blow
220V:1/20A 250VAC Slow-Blow
Size: Height (with feet) - 100mm (3.9 in.)
Width - 260mm (10.2 in.)
Depth (overall) - 370mm (14.6 in.)
Weight: 3.2kg (7 lb.)
Accessories supplied with Model 252: Part No.
KELVIN KLIPS® Four-Terminal Clips 43072
Instruction Manual 43158
Options Available: Part No.
Model 1412B Universal Limits Comparator 31412B
Sorting Fixture Model 2001 (low frequency) 32001
Cable Assembly (for Model 2001 connection) 43586
Front Panel Dust Cover 43374
Additional Accessories Part No.
Chip Tweezers 2005B/SP5132
Kelvin Klip Rebuild Kit KK100
Chip Tweezer Rebuild Kit 47422
1-3
To Next Page
Loading...
