Teka HLC 847 SC - Food Probe; Troubleshooting

18
14. Close the panel. The second rinsing cycle
starts.
15. When the rinsing cycle has finished the
display shows the symbol and emits
a beep, until the water tank is removed.
16. Remove, empty and dry the water tank.
The food probe measures the inner
temperature of the food being cooked and
ends the active function when a selected
temperature is reached.
 Program the desired cooking function as
previously described.
 At the end of the described steps, the food
probe menu will appear on the display.
 Rotate the right dial to select the desired
temperature.
 Press or to confirm and start the
cooking function.
Display
Description
Descaling
SOFT
Soft water.
MED
Medium water.
HARD
Hard water.
Appliance must be descaled.
Flashing descaling starts.
0,5L
Feed 0,5l descaling solution/fresh water into the water tank.
0,8L
Feed 0,8l cold water into the water tank for rinsing.
Water tank
Indication that water tank is missing.
Tank is empty, please fill with 0,5l of water.
The water tank must be removed, emptied and reinserted.
Other messages
DEMO mode
Showroom mode
END
End of function
Please cover the socket inside the cavity if
you are not using the food probe. Failure
to cover the socket will cause damages to
the oven.