Teka MS 620 BIS - Basic Functions; Microwave; Quick Start; Function: Grill

14
The screen will display four lines and
oven operation will be blocked.
2. The Clock will continue to be displayed
and the Safety block indicator will
illuminate on the DISPLAY (7).
3. In order to unlock the microwave, press
the STOP / SAFETY BLOCK KEY (6) for
3 seconds. The microwave will beep and
the screen will display the clock again.
Microwave
1. Press the PROGRAM KEY «P» (1). The
MICROWAVE indicator lights up on
the DISPLAY (7). Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
2. Press the DURATION KEY (2). Enter the
desired operating time by turning the
ROTATING KNOB (8) in any direction.
Confirm by pressing the DURATION
KEY (2). again.
3. To change the power of the microwave,
press the POWER/ WEIGHT KEY (3). (If
this key is not pressed, the appliance
functions at the maximum power.) Enter
the desired power turning the
ROTATING KNOB (8) in any direction.
Confirm by pressing the POWER/
WEIGHT KEY (3) again.
4. Press the START KEY (4). The
microwave starts to function.
Quick Start
1. In the Standby mode press START (4).
The appliance starts immediately to
function on the MICROWAVE function at
the maximum power for 30 seconds.
2. If you would like to increase the
functioning time press the START KEY
(4) again. Each time the START key (4) is
pressed the duration increases in 30
seconds.
Function: Grill
1. Press the PROGRAM KEY «P» (1). Select
the GRILL function by turning the
ROTATING KNOB (8) in any direction.
Confirm the function by pressing the
PROGRAM KEY «P» (1) again.
2. Press the DURATION KEY (2). Enter the
desired operating time by turning the
ROTATING KNOB (8) in any direction.
Confirm by pressing the DURATION
KEY (2) again.
3. Press the START KEY (4). The
microwave starts to function.
Microwave + Grill
1. Press the PROGRAM KEY «P» (1). Select
the MICROWAVE + GRILL function
by turning the ROTATING KNOB (8) in
any direction. Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
2. Press the DURATION KEY (2). Enter the
desired operating time by turning the
ROTATING KNOB (8) in any direction.
Confirm by pressing the DURATION
KEY (2) again.
3. To change the power of the microwave,
press the POWER/ WEIGHT KEY (3). (If
this key is not pressed, the appliance
(1)
(2)
(3)
(4) (5)
(6)
(7)
(8)