Teka VT TC 2P.1 - Special Functions: Heat-Up and Outer Ring

ble to also use the outer ring, next to the
inner circuit, so that the cooking surface
adapts better to the size of the cookware.
Connection / activation of outer ring
1 Choose the desired power level (from 1
to 9) using sensor buttons or (5/4)
in the double circuit heating element
located in the upper part of the cooker.
2 Touch sensor button (6) to activate
the outer ring. Indicator light (13) will
turn on, which indicates that the outer
ring is activated.
Disconnection / deactivation of outer ring
1 Touch sensor button (6). Indicator
light (13) turns off and the outer ring will
be disconnected. The inner ring will con-
tinue to be turned on until the heating
element is disconnected.
Heat-up function
(Automatic start of cooking)
This function will help you when cooking,
since it is not necessary to be there at the
same time. The touch control panel pre-pro-
grammes the chosen hotplate to the maxi-
mum power level and then lowers it to the
desired power level, chosen by you, after a
certain amount of time. (See table 1).
ACTIVATING THE HEAT-UP FUNCTION
1 Choose power level
9 and then touch
sensor button (5). The decimal point
of the power indicator will blink for 10
seconds.
2 Before 10 seconds have passed, choose
the power level (between
1 and 8). After
10 seconds, you will hear a sound and
the decimal point (16) will stay on, which
indicates that the automatic boost func-
tion is activated. If the chosen level is
0
or 9, the heat-up function will not be acti-
vated.
Example:
You want to cook at power level
6 on a hot-
plate and you want to quickly heat up the
element at the beginning.
Choose power
9, touch sensor button
(5) again and the decimal point will blink.
Next, use sensor button to lower the
power level to 6. The system will keep the
heating element at power level
9 (maxi-
mum) for 150 seconds; after that time, the
system will automatically lower the power
level to
6.
MODIFYING THE POWER LEVEL
DURING THE HEAT-UP
With the heat-up function activated, press
sensor button (5) and the system will
change the power level to the new value
chosen; however, if the new power level
chosen is 9, the function will be deactiva-
ted.
When increasing the power level using
sensor button (5) the system takes into
account the time passed up until that point.
GB
66
Table 1
1
2
3
4
5
6
7
8
60
180
288
390
510
150
210
270
Level
selected
HEAT-UP COOKING
FEATURE
(Time in seconds)