8 – The Program's Main Screen
The icons in the main screen of the program shown in Figure 8.
9 – Data Interpretation
To interpret the data, the first image on the screen are the logic of how should know. The largest one of the
received data to the right of the color Valence color scale is assigned. This original is red in color. The far left of the
least significant of the received data to one color scale color is assigned. This color is blue. Perceptions Dec the
remaining colors are distributed. As can be understood from this situation, a color, an object, or the value of the
metal is given. So, did you see the Red metal or red you may have seen a grave like it's nothing. Shot on the
received image, the perception, perception and perceived value for the power of the scale makes a comment that
is evaluated at the same time.
For example:
Mineral Metal Detector 1 and valence perceptions is regarded as smaller. The detection point is regarded as a
small metal. The figure that is perceived as the shape of the metal or are struggling to grasp.
The radiometer anomaly positive for brick, Khorasan, Iron, Steel, bronze, and soft soil anomaly is considered
negative when the general structure, marble or water is considered to be. Radiometer soil layer 4 and also in
perceptions of value perceptions between 4-12 or sensor move while considered under the mineralized structure
is considered as a metal 12 on perceptions. The power of perception by looking at the detection point, such as
fracture detection, small metal detection, while if a figure or cube can be evaluated depending on the strength of
ihfa, tombs, tunnels, rooms, etc. can be interpreted as such. Below are a few examples of sensing area.
The process is a condition that requires advanced interpretation experience.
Gradiometer Tomb
To Next Page
Loading...