TEKTELIC Communications Kona Micro Gateway User Manual

Kona Micro Quick Start Guide T0005281_QS Version 0.2
TEKTELIC Communications Inc. Confidential Page 7 of 16
5. Module Bootup:
Bootup time of the Gateway is approximately 2 minutes. During bootup, the LED status
is Flashing Green.
6. Module LED status:
After bootup, LED status will be Flashing Green
1
. The LED will remain flashing green
until the Gateway receives a downlink packet from the Network Server. Upon reception
of a downlink packet from the Network Server, the LED will change to Solid Green.
(Refer table 1 for different LED states).
7. Retrieve Module IP address:
KonaFT supports a “Find my gateway” feature that can find a list of all the Tektelic GWs
connected to the local network. From this list the IP of your particular GW can be
identified using the MAC address. The Gateway MAC address is printed on the Gateway
label.
8. Enter your gateway’s IP address and port number 161 (default) on KonaFT then Select
Start Button.
1
In SW versions older than 2.1.3, lack of downlink packets is indicated by Flashing Red

TEKTELIC Communications Kona Micro Gateway Specifications

General

Brand	TEKTELIC Communications
Model	Kona Micro Gateway
Category	Gateway
Language	English