Tektronix 544 - Page 71

POWER CHASSIS (Cont'd)
Parts List— Type 544
REF.
NO.
PART NO.
SERIAL/MODEL NO.
Q
T
Y.
DESCRIPTION
EFF.
DISC.
6 348-0004-00
1
GROMMET, 3/„ inch
7 200-0560-00
1
COVER, capacitor
8 200-0259-00 1
COVER, capacitor
9 348-0005-00 1
GROMMET, y2 inch
10 348-0003-00 1
GROMMET, y4 inch
11
-
Mounting Hardware For Pot:
210-0444-00 1 NUT, hex, %-32 x '/2 x 5/8 inch
210-0840-00
1
WASHER, .390 ID x % 4 inch OD
210-0012-00 1 LOCKWASHER, internal, % x y2 inch
12 136-0008-00
5
SOCKET, STM7G
-
Mounting Hardware For Each: (not included)
213-0044-00
2
SCREW, thread cutting, 5-32x3/14 inch PHS phillips
13 124-0089-00 5
STRIP, ceramic, 3/4 inch x 7 notches
-
Each Includes:
355-0046-00
2 STUD, nylon
-
Mounting Hardware For Each: (not included)
361 -0009-00 2 SPACER, nylon, .281 inch
14 124-0091-00 6
STRIP, ceramic, 3/4 inch x 11 notches
-
Each Includes:
355-0046-00 2 STUD, nylon
-
Mounting Hardware For Each: (not included)
361-0009-00
2
SPACER, nylon, .281 inch
15 179-0835-00
1 CABLE HARNESS, interconnecting
16
-
Mounting Hardware For 5 Watt Resistor-.
211-0544-00 1 SCREW, 6-32 x 3/4 inch THS phillips
210-0478-00 1
NUT, hex, resistor mounting
211-0507-00 1 SCREW, 6-32 x 5/u inch BHS
17
386-0255-00 2 PLATE, metal, large capacitor
-
Mounting Hardware For Each: (not included)
432-0048-00 1 BASE, large capacitor
211-0588-00 2
SCREW, 6-32 x % inch HHS
210-0006-00 2 LOCKWASHER, internal, #6
210-0407-00
2
NUT, hex, 6-32 x '/4 inch
18 179-0834-00 1 CABLE HARNESS, power
19 260-0336-00
1
SWITCH, thermal cutout
-
Mounting Hardware: (not included)
213-0044-00
2 SCREW, thread cutting, 5-32 x 3/ll4 inch PHS phillips
20
124-0090-00
8 STRIP, ceramic, 3/4 inch x 9 notches
-
Each Includes:
355-0046-00 2 STUD, nylon
-
Mounting Hardware For Each: (not included)
361-0009-00 2 SPACER, nylon, .281 inch
21
210-0201-00 2
LUG, solder, SE4
-
Mounting Hardware For Each: (not included)
213-0044-00
1 SCREW, thread cutting, 5-32 x 3/u inch PHS phillips
22 179-0765-00
1
CABLE HARNESS, 110 volt
6-29