Application Exa
mples
5. Select Edit > Select for Copy > Full
Screen (bitm ap) .
6. Press Ctrl+C.
7. Click in the Word document wherever
you want to place the screen shot, and
then press Ctrl+V.
Quick Tips
The instrument comes with a variety of OpenChoi ce software tools designed to ensure m aximum efficiency and
connectivity to the rest of your design environment.
Triggering on Buses
You can use your instrument to trigger on CAN (optional), I
2
C, and SPI buses. The instrument can display both physical layer
(as ana
log waveforms ) and, for CAN and LIN triggers, protocol level information (as digital and symbolic waveforms).
To set u
p the bus trigger:
1. Select Trig > A Event (Main) Trigger
Setup....
DPO7000 S eries Quick Start User Manual 89
To Next Page
Loading...
