Display a Wavefo
rm
6. To adjust the zo
omed area vertically,
select Vertical > Zoom Setup...,
click a vertical field, and then use the
multipurpose k
nobs to adjust the Vertical
Position and Factor.
Quick Tips
To clear the
zoom area, click Position Factor Reset from the Zoom Setup control window.
You can turn
each zoom display on and off from the Zoom Setup control window.
Push the Mu
ltiView Zoom button to toggle all zoom displays on and off.
To repositi
on the zoomed area horizontally, click and drag the horizontal marker at the bottom of the zoom box.
46 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
