Saving and Recalling Waveforms
TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
3–109
To View a Waveform on a Spreadsheet (TDS 400A Only)
To save a waveform and view the waveform data using a spreadsheet (this
example uses EXCEL):
1. With a disk in the disk drive, press save/recall WAVEFORM
➞ Save
Format
(main) ➞ Spreadsheet (side).
2. Press Save Wfm
(main) ➞ To File (side). Then press Save to Selected
File
(side).
3. Remove the disk and place it in your computer drive.
4. Start EXCEL.
5. Using the EXCEL File menu, select Open. From the List Files of Type
menu, select Text Files (*.prn, *.txt, *.csv). From the Drives menu, select
the drive containing the waveform file. From the File Name menu, select the
name of the waveform file. Now select OK.
To Next Page
Loading...
