Command Descriptions
2–270
TDS Family Oscilloscope Programmer Manual
specifies one of the input channels.
selects channel 1 as the input source for the delayed trigger.
TRIGger:DELay:EVENTS? (Query Only)
Returns the current delayed trigger event parameter.
Trigger
might return
TRIGger:DELay:EVENTS:COUNt
Sets or queries the number of events that must occur before the delayed trigger
occurs when TRIGger:DELay:BY is set to EVENTS. This is equivalent to
setting the Delay by Events count in the Delayed Edge Delay side menu.
Trigger
is the number of delayed edge trigger events. The TDS 400A range is 1 to
(10E7 –1). The TDS 510A, 500C, 600B, and 700C range is 2 to 10E7.
Examples
Group
Syntax
Examples
Group
Syntax
Arguments
To Next Page
Loading...
Need help?
General
