Command Descriptions
2-116
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
HARDCopy
Sends a copy of t he screen display followed by an EOI to the port
specified by HARDCopy:PORT. The format and layout of the output
is specified with the HARDCopy:FORMat and HARDCopy:LAYout
commands. This command is equivalent to pressing the PRINT
button on the front panel of the TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 series or the HARDCOPY button on the
front panel of the TDS200 series. :
NOTE. The TDS1000B and TDS2000B serie s support the HARDCo-
py:PORT commands and que ries for compatibility with programs
designed for earlier oscilloscopes. (For TDS1000B and TDS2000B
series, you can only set the port to USB and the query wi ll always
return USB).
The TDS1000B and TDS2000B oscilloscopes provide PictBridge
printer support through a USB Device port on the rear of the
oscilloscope. See the PictBridge commands on page 2--27.
HARDCopy? returns format, layout, and port information.
NOTE. This command is not IEEE Std 488.2-1987 compatible .
Hard copy
HARDCopy { ABOrt | STARt }
HARDCopy?
ABOrt terminates the hard copy output in process.
Group
Syntax
Arguments
To Next Page
Loading...
