EasyManua.ls Logo

TELECO AUTOMATION Harol EVO - Page 14

TELECO AUTOMATION Harol EVO
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAG. 14 Afstandsbediening EVO/NOON - Handleiding Rev. 06/20
Intrekbare lamellen - Compactable blades - Lames rétractables - Fahrbare Lamellen
B1
× 3
2
3
5
107
210
ON
1 2 3 4 5 6
CTS
L2
L3
DIP SWITCH
P1
P2
17
16
19
18
22
23
12
11
15
14
13
1 2 3 4 5 6
1
4
Een 7-kanaalszender opslaan (CH5, CH6, CH7)
1 open de bedieningseenheid van de lamellen
2 druk drie (3) keer op de toets die bij de motor hoort (P1 voor motor 1 enz.) en houd deze ingedrukt
3 de zoemer laat bij elke druk een pieptoon horen en vervolgens een continu geluid
4 druk tijdens het continue geluid op een knop (CH5, CH6, CH7) op de afstandsbediening om deze in het
geheugen op te slaan
5 snelle pieptonen geven aan dat het gelukt is
De drie overige knoppen op de afstandsbediening worden automatisch onthouden
WW/C CW/G
Y/B O/R
WW/C CW/G
Y/B O/R
WW/C CW/G
Y/B O/R
+ STOP -
Memorization of 7 channels transmitter (CH5, CH6, CH7)
1 open the blades control unit
2 press three (3) times the push button associated to the motors (P1 for Motor1 etc.), and hold it down
3 the buzzer will make two beeps and then sound continuously
4
during the sound press one push button (CH5, CH6, CH7), of the 7-channel transmitter which has to be
memorised
5 the memorization is indicated by the intermittently sound of the buzzer
All the three push-buttons of the transmitter are automatically memorized
Mémoriser un émetteur avec 7 canaux (CH5, CH6, CH7)
1 ouvrir l’unité de contrôle des Lames
2 appuyer trois (3) fois sur la touche associé au moteur (P1 pour moteur 1 etc) et garder l’appuyé
3 l’avertisseur sonore émet un bip à chaque appui et puis un son continu
4 au cours de son appuyer sur le bouton (CH5, CH6, CH7) de l’émetteur à mémoriser
5 la mémorisation est signalée par le son intermittent rapide de l’avertisseur sonore
Tous les autres trois boutons de l’émetteur sont mémorisé automatiquement
Speicherung eines 7-Kanal Senders (CH5, CH6, CH7)
1 steuergerät zur Kontrolle der Lamellen öffnen
2 drücken Sie dreimal (3) die Taste in Bezug auf den Motor (P1 für Motor 1, usw.) und halten Sie sie gedrückt
3
das Gerät quittiert jeden Druck mit einem Ton und geht dann in
Dauerton über
4 drücken Sie während des Dauertons den einzulernenden Sendekanal (CH5, CH6, CH7)
5 die erfolgreiche Speicherung wird durch schnelle Töne angezeigt
Alle anderen Drei Senderkanäle werden automatisch eingespeichert

Related product manuals