EasyManua.ls Logo

TELECO AUTOMATION Harol EVO - Page 7

TELECO AUTOMATION Harol EVO
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAG. 7 Afstandsbediening EVO/NOON - Handleiding Rev. 06/20
Kantelbare lamellen - Adjustable blades - Lames réglables - Ausrichtbaren Lamellen
A4
107
210
ON
1 2 3 4 5 6
CTS
L3
DIP SWITCH
P1 P2
× 12
2
3
5
14
15
13
12
8
7
11
10
9
1 2 3 4 5 6
1
4
Een 7-kanaalszender opslaan (Versie op verzoek: 45°-60°-95°-140°)
1 open de bedieningseenheid van de lamellen
2 druk twaalf (12) keer op de toets die bij de motor hoort (P1 voor motor 1 enz.) en houd deze ingedrukt
3 de zoemer laat bij elke druk een pieptoon horen en vervolgens een continu geluid
4 druk tijdens het continue geluid op een knop op de afstandsbediening om deze op te slaan
5 snelle pieptonen geven aan dat het gelukt is
Alle andere knoppen op de afstandsbediening worden automatisch onthouden
Memorization of 7 channels transmitter (Upon request: 45°-60°-95°-140°)
1 open the blades control unit
2 press twelve (12) times the push button associated to the motors (P1 for Motor1 etc.), and hold it down
3 the buzzer will make two beeps and then sound continuously
4 during the sound press one push button, of the 7-channel transmitter which has to be memorised
5 the memorization is indicated by the intermittently sound of the buzzer
All the push-buttons of the transmitter are automatically memorized
Mémoriser un émetteur avec 7 canaux (Version sur demande: 45°-60°-95°-140°)
1 ouvrir l’unité de contrôle des Lames
2 appuyer douze (12) fois sur la touche associé au moteur (P1 pour moteur 1 etc) et garder l’appuyé
3 l’avertisseur sonore émet un bip à chaque appui et puis un son continu
4 au cours de son appuyer sur le bouton de l’émetteur à mémoriser
5 la mémorisation est signalée par le son intermittent rapide de l’avertisseur sonore
Tous les autres boutons de l’émetteur sont mémorisé automatiquement
Speicherung eines 7-Kanal Senders (Ausführung auf Wunsch: 45°-60°-95°-140°)
1 steuergerät zur Kontrolle der Lamellen öffnen
2 drücken Sie zwölfmal (12) die Taste in Bezug auf den Motor (P1 für Motor 1, usw.) und halten Sie sie gedrückt
3
das Gerät quittiert jeden Druck mit einem Ton und geht dann in
Dauerton über
4 drücken Sie während des Dauertons den einzulernenden Sendekanal
5 die erfolgreiche Speicherung wird durch schnelle Töne angezeigt
Alle anderen Senderkanäle werden automatisch eingespeichert

Related product manuals