~ ~ TE LE C0
TELECOAUTOMATION SRL - Via dell'Artigianato, 16 - 31014 Colle Umberto (TV) ITALY (
E
••• ~ TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536
•.•• AUTOMATION
Thisdocument isthe property of TelecoAutomation Sriwho reserves ell reproduction end copying rights
Electronic for the remote control of tubular motors for roller blinds, rolling shutters, doors with limit
switch inside or outside the motor, radio receiver section with transmitter channel memorization by
means of internal push button or via radio.
Possibility to conneet wired and wireless safety devices (wireless IR or 8K2 safety edge) with auto-
test con trol before every closing movement.
Possibility to connect a 230
V'"'-
courtesy lamp with varia bie time from 1 min. to 12 hours (detault
1min.)
Plastic housing
tor
extemal use equipped with clamps.
Possibility of centralized controls for simultaneous control of several appliances.
Possibility to connect external mechanical controls with dynamic push button function and blockage
push button.
The first command after lhe reset, wireless or trom a push button, is always an opening commando
~.:.CONNEf:TIONS
Description of the connections:
1 Input ground general power supply
2 Input ground motor 16
3 Input general power supply 230 V --- phase 17
4 Input general power supply 230 V --- neutral 18
5 Opening output relay contact
6 Output 230 V --- neutra I by means of fuse 19
(common motor) 20
7 Closing output relay contact
8-9 Output LP 230
V---
60 W max. for for 21
flashing lamp 22
10-11 Output LC 230 V --- 300 W max. for 23
courtesy lamp
(only for the version with courtesy light) 24
12 Output 12 V --- 80mA for photocells 25
13 Push buttons and safety
common
14 FTC common
15 FTC input (NC norrnally closed)
Safety edge input (brown wire), 8K2 input
Safety edge input (green wire), 8K2 input
Safety edge input (white wire)
Push buttons common
Dynamic push-button input (NO normally open)
Stop push-button TB (NC normally closed)
Push buttons common
Magnetic contact input FC (NO normally open)
Antenna ground
Antenna pole (wire 8.5cm)
Code Number:
Series
Draft
Date
TVPRP868A08
TVLink RS868
T449.02 22/03/12