Teleco TVPLT868C80T0 - LED Control and Scene Configuration; Single Channel LED Control Setup; 7-Channel Transmitter for LED; Customizing LED Light Scenes

5
3.1 Memorization of a single channel with ON/OFF - DIM function (LED)
This conguration permits the control of the LED with a single channel of any transmitter. With short pulses
(<800 ms.) turn the LED on and off; keeping the button pressed: increase or decrease the intensity.
• Press 8 times P1 keeping pressed the
eighth time.
• The buzzer emits a continuous sound.
Press any button of transmitter to
memorize.
• Once the memorization is successfully
completed, the buzzer emits a fast
intermittent sound.
...
P1
< 1 sec.
----- 8 TIMES -----
...
last
3.2 Memorization of a 7 channels transmitter (LED)
This conguration permits the control of the LED with a 7 channel transmitter, in which every channel is
connected to a single operation:
...
P1
< 1 sec.
----- 9 TIMES -----
...
last
CH1 100%
CH2 75 %
CH3 50 %
CH4 25 %
CH5 DIM +
CH6 DIM -
CH7 OFF
• Press 9 times P1 keeping pressed
the ninth time.
• The buzzer emits a continuous
sound. Press any button of
transmitter to memorize.
• Once the memorization is
successfully completed, the buzzer
emits a fast intermittent sound.
Changing the preset light scenes of the 7 channels transmitters
adjust new valuepress the scene to modify press and hold more than 5s
3- Press the button CH7 and hold it
down for 5 sec. LED turn off. After 5
sec. buzzer makes a beep and the LED
turn on at the new value.
2- Adjust the new value with
the buttons CH5 and CH6
1- Press the button related to
the scene to modify
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH1
CH2
CH3
CH4
CH5
CH6
CH7