Teleco TVPLT868C80T0 - Transmitter Management and Deletion; Deleting Specific Transmitters; Clearing All Transmitters; Adding New Transmitters Remotely

6
4.2 Deleting all the transmitters
• Press 6 times P1 keeping pressed
the sixth time.
• The buzzer emits a fast intermittent
sound for about 10 sec.
• Release when the sound becomes
continuous.
5.2 Remote deletion of a radio code
• Press P3 of the transmitter already
memorized. The buzzer emits a
continuous sound.
• Press the button to delete within 10
seconds.
• Once the deletion is successfully
completed, the buzzer stops
sounding.
...
10 sec.
P1
< 1 sec.
----- 6 TIMES -----
...
last
Memorized To delete
within 5 sec.
P3
3 times
...
4.1 Deleting a transmitter
• Press 5 times P1 keeping pressed the
fth time.
• The buzzer emits a continuous sound.
Press the button to delete within 10
seconds.
• Once the memorization is successfully
completed, the buzzer emits a fast
intermittent sound.
...
P1
< 1 sec.
----- 5 TIMES -----
...
last
within 10 sec.
5.1 Remote memorization of further radio codes
• Press P3 of the transmitter already
memorized. The buzzer emits a
continuous sound.
• Press the button to copy. The buzzer
stops for 1 second and emits the sound
again.
• Press the button to memorize of the
new transmitter.
• Once the memorization is successfully
completed, the buzzer emits a fast
intermittent sound.
The new transmitter must have the same (or higher) number of buttons as the memorized one.
At the end of procedure it will have the same functioning of the memorized transmitter.
P3
Memorized NEWMemorized
within 5 sec.
...
within 5 sec.
1 sec.