Telefunken TF-1525 - Page 4

4
Instruction manual
4
Display Auto Off function
• Press & hold the display auto on-off
button for 2 seconds, the LED display standby
indicator (
) will light on, the LED display will
turn off after 15 seconds automatically, Press
any button to maintain the LED display for 15
seconds.
• Press & hold the display auto on-off
button for 2 seconds to cancel this function, the
LED display standby indicator will light off.
Radio operation
Tuner operations
• Press button to turn the radio on or off.
• Adjust the program by pressing
or buttons. Press and hold these buttons
to automatically scan to the next radio station
with a strong signal.
• Use VOL UP/DOWN buttons to adjust
volume level.
• To obtain better FM signal reception,
extend the FM wire antenna to its full length.
Radio presets
• Press button to turn the radio on.
• Use the or
buttons to select the desired radio station.
• 3UHVVDQGKROGWKH0(00EXWWRQ
“P01” will blink in the display.
• Use the or
to select the desired preset station (P01-P10)
• 3UHVVWKH0(00EXWWRQDJDLQWRVHW
the preset.
• Repeat steps 2 through 5 to set more
presets.
• The unit can store up to 10 stations.
• When “P01-P10” is blinking, press the
or button to select the
preset number.
• When recalling preset stations, press
0(00 button to select the
preset number.
Sleep to music
• In Radio mode, press SNOOZE/SLEEP
button to turn on sleep mode. Keep pressing
this button to select the sleep period (off, 10,
20, 30, 40, 50, 60, 70, 80, 90 minutes). The
figures will blink on the display for 5 seconds.
The radio will turn off automatically after the
preset time period elapses.
• To cancel the sleep function, press
button.
Alarm operation
Setting the alarm
• Press either ALARM 1 or ALARM 2
buttons. Press and hold the button again to
cycle through alarm settings in following order:
alarm time => alarm signal => alarm
frequency. The selected setting will blink.
• Press repeatedly button or press
and hold it to decrease the setting; press
repeatedly button or press and hold it to
increase the setting.
• In normal mode, press ALARM 1 or
ALARM 2 buttons to show the alarm settings.
• In normal mode, press and hold ALARM 1
or ALARM 2 buttons to set the desired alarm.
Alarm signal selection
When setting the alarm signal you can select
buzzeror radio (last radio station will be on).
Alarm frequency
Press the or button to select an
alarm frequency (d1-1 = on a selected day
only*, d1-5 = Monday to Friday, d1-7 =
Everyday, d6-7 = Weekend only).
*Press the ALARM 1 or ALARM 2 button
when this option is selected. Then press the
or to select a specific day for the
alarm activation (e.g. d1 = Monday, d2 =
Tuesday).
• Once the alarm setting is done, the alarm
will be automatically activated with the
corresponding alarm indicator (alarm or radio)
switched on.
• When the alarm time comes, the signal will
sound for 60 minutes if no button is pressed.
After that the sound will mute and start at the
same time the following day.