Telesis PX24X - Page 17

• w.pxf.lscxv52
• w.pxf.lscxss7
• w.pxf.lscxdss
• w.pxf.lscxcas
Number of units per system
There can be only one DFF card in any type per system.
Location
Main cabinet (2.pxf.urnxmkn or 2.pxf19inmkn), the first slot to the right of the power
supply unit. Mounted over the control and switching unit (2.px0.ipbxdfl).
w.pxf.lscxv52
Description
In a PX24X Hybrid IP PBX, each E1 link in a V5.2 interface requires a w.pxf.lscxv52
license. The license is granted to a particular PX24X system and it is non-transferable.
w.pxf.lscxss7
Description
In a PX24X Hybrid IP PBX, each SS7/E1 interface – that is an E1 with a Signaling
System No.7 signaling path or sharing a common signaling path on any other E1-
requires a w.pxf.lscxss7 license. The license is granted to a particular PX24X system
and it is non-transferable.
w.pxf.lscxdss
Description
In a PX24X Hybrid IP PBX, each E1 interface with the following Primary Rate ISDN
signaling types requires a w.pxf.lscxdss license.
• DSS1 Euro-ISDN TE (terminal side)
• DSS1 Euro-ISDN NT (network side)
• ECMA QSIG TE (terminal side)
• ECMA QSIG NT (network side)
The license is granted to a particular PX24X system and it is non-transferable.
w.pxf.lscxcas
Description
In a PX24X Hybrid IP PBX, each E1 interface with the following Channel Associated
Signaling (CAS) types requires a w.pxf.lscxcas license.
• Single-bit E&M emulation
17