ELD Installation Parts Outline
2
The Teletrac Navman ELD Certified solution is built on the Qube300, MNAV, JPOD/VPO hardware
platform. Established installation process for these units must be applied. The information in this guide
will provided a hardware overview and ELD specific information. For questions, please contact Teletrac
Navman Field Service team at US.FieldManagers@teletracnavman.com
Parts required for ELD installation
• Qube300 – antenna, power harness
• MNav950 – cradle, and MN950 cable
• JPOD2 or VPOD – Always required for ELD compliance
• Product Documentation – Left in each vehicle
To Next Page
Loading...