THE HOME PAGE
This is the default landing page of the web server and it shows general together with crucial information
about the current state of your conference system. Click the feature name to go to the dedicated page to
configure the setting.
On the left side you can see the following information:
General volume
Microphone mode
Number of active units
Number of faulty units
Number of connected but uninitialized units
Faulty units, means that there are units missing, that are normally in the initialization list. If this is
the case, this is indicated in red. A reason could be that they are not booted correctly or that they
are physically disconnected from the Plixus network.
On the right side you see the following items:
IP address o the system
MAC address of the Plixus engine
Connection status with CoCon Room Server
Connection Status with Plixus Core
By default it is not possible to disconnect from Plixus Core, however when Plixus Core crashes
home page will show Plixus Core Not connected. Click Restart to restart Plixus Core.
THE HO ME PAG E 11 1
To Next Page
Loading...
